sales1@sucohansmushroom.com
+86 19948106351
Bunsen burner is one of the high temperature heating tools commonly used in scientific laboratories. The Bunsen burner can safely burn gaseous fuel, and the flame does not flow back into the gas supply pipe. Gas or natural gas, propane gas, etc. are usually used for fuel.
Bunsen burners can be used to heat non-combustible objects or solutions. It can be used to heat objects to very high temperatures. The maximum temperature can be close to 1200 °C. Because the operating temperature is higher than the alcohol lamp, the material of the lamp must use a heat-resistant metal.
To connect to the burner, please use a gas hose with inner diameter of 8-9 mm (5/16" or 3/8").
With gas regulator, air intake regulator, and flame stabilizer.Can be used with natural gas and liquid propane.Flame Adjustable: Needle valve fitted above the base can realize easily control the flame, Multiple flames for multiple purpose.
Base diameter - 7.8cm/3.07in, height - 17.5cm/6.89in Materail: Zinc alloy base & copper tube, Weight: Approx. 224g
Burner, Air & Gas Adjustment with Flame Stabilizer for Natural Gas & Propane & Lab Heating
Features:
Bunsen burners can be used to heat non-combustibleobjects or solutions. It can be used to heat objects to very high temperatures.The maximum temperature can be close to 1200 °C. Because the operatingtemperature is higher than the alcohol lamp, the material of the lamp must usea heat-resistant metal.
Note: Because its fuel is in a gaseous state atroom temperature, special attention should be paid to the safety of thepipeline. Bunsen burners must be used with special care when using them. Alwayscheck that all switches are off before use. The main switch can only be turnedon when it is determined that all switches are off.
|
| |
|---|---|---|
Base diameter - 7.8cm/3.07in, height - 17.5cm/6.89in Materail: Zinc alloy base & copper tube, Weight: Approx. 224g Materail: Zinc alloy base & copper tube Color: silver | Bunsen burner is one of the high temperature heating tools commonly used in scientific laboratories. The Bunsen burner can safely burn gaseous fuel, and the flame does not flow back into the gas supply pipe. Gas or natural gas, propane gas, etc. are usually used for fuel. |
|
|
|
|---|---|---|
To connect to the burner, please use a gas hose with inner diameter of 8-9 mm (5/16" or 3/8"). | With gas regulator, air intake regulator, and flame stabilizer.Can be used with natural gas and liquid propane.Flame Adjustable: Needle valve fitted above the base can realize easily control the flame, Multiple flames for multiple purpose. |
Steps for usage:
1. Open the laboratory window and keep the airflowing.
2. Attach the Bunsen burner hose to the gas pipeand place it on the fire board.
3. Turn off the air holes of the lamp foot andignite the match on the air outlet.
4. Start the air smash and ignite the light, thenthe flame is orange.
5. Open the air vents to allow fresh air to enter,the flame turns blue and the temperature becomes high.
6. After use, close the air vents and turn off theair sputum.
7. Pull the Bunsen burner out of the trachea.
Contact: Alice
Phone: +86 19948106351
E-mail: sales1@sucohansmushroom.com
Whatsapp:+86 19948106351
Add: Hebei Province, China Changan, Shijiazhuang Num 899
We chat
