8" X 5" X 19",0.2 Micron Mushroom Bags/Mushroom Grow Bags

Product Description

Autoclave Bags With Filter Patch

• This thick polypropylene material is still not easy to crack and break, effectively protecting your mushrooms or other plants.

• There is enough to put the hydroponic items you want

• Mushroom bags for hydroponics.

• Using these bags, compared with trays and pots, can greatly reduce the space required for mushroom growth.

20cmx12cmx50cm 5"(gusset) x19" (long)x 8”(wide), typically  for 5-8 pounds block,0.2 micron filter patch,Heavy duty 3 mil  polypropylene Sealable, Autoclavable and Durable Easily grow your own  mushrooms in bulk 100% sterilized premium mushroom growing substrate  Fortified with all necessary vitamin's and minerals

Water content of culture material: If the water content of  the medium is too high, the ventilation will be affected, hyphae will  grow slowly due to lack of oxygen, moisture will be deposited in the  lower half of the cultivation bag, and the hypha length will not be able  to go.

Please refer to the following standards:

1. Grain food: ±42% moisture

2. Mushroom culture material: ±62% moisture Please handle it carefully.

Sealing method：Our these mushroom bags can be sealed with an impulse sealer, or just tie to seal . these bags are durable and can be reusable in most times.

Sterilization Continuous sterilization at a sufficiently high  temperature, high-temperature autoclave sterilization, sterilization  speed is 6-7 times normal temperature, steam can quickly penetrate the  bacteria bag, to achieve sterilization effect, bacteria bag should be  placed in a "hollow type", in the middle Forms a square hollow with 2 to  4 pockets space, so that the penetration is stronger, the temperature  rises faster, and there is no dead angle in all directions.

• Sterilization Continuous sterilization at a sufficiently high temperature, high-temperature autoclave sterilization, sterilization speed is 6-7 times normal temperature, steam can quickly penetrate the bacteria bag, to achieve sterilization effect

• bacteria bag should be placed in a "hollow type", in the middle Forms a square hollow with 2 to 4 pockets space, so that the penetration is stronger, the temperature rises faster, and there is no dead angle in all directions.

• After the high-temperature steam temperature was maintained at 125°C for 10 minutes until the center of the most concentrated bag culture material, the temperature was maintained at 125 degrees for about 150 minutes, and the sterilization was basically completed.

• cool down In a dry, well-ventilated space, open the folded bag mouth while ensuring the supply of sterile compressed air.

• Vaccination Sterilize all utensils before inoculation and complete in aseptic room sterile conditions.

• seal Under the same aseptic conditions, the carbon dioxide content of the ambient air is completed up to 2500 PPM by double-sided heat welding, thus ensuring dry ventilation.

• Preserved bacteria It needs to be stored in a cool, dry environment.